Skip to content
No results
  • PIRHOME
  • Pirsensor News
  • Reference
  • Troubleshooting
PIRHOME
PIRHOME.com

PIR & Motion Sensor

  • PIRHOME
  • Pirsensor News
  • Reference
  • Troubleshooting
PIRHOME
PIRHOME.com

PIR & Motion Sensor

  • Troubleshooting

PIR Sensor False Triggers from Electric Motors (Startup Spikes)

Introduction Electric motors generate electrical noise when starting and running. This noise can couple into PIR sensor circuits, causing false triggers. This is common with fans, pumps, garage door openers, and power tools. How Motors Cause Interference 1. Conducted Noise…

Read MorePIR Sensor False Triggers from Electric Motors (Startup Spikes)
  • Troubleshooting

PIR Sensor Not Detecting After Firmware Update (ESPHome/Tasmota)

Introduction Many users integrate PIR sensors with ESPHome or Tasmota on ESP8266 After a firmware update, the sensor may stop working. This is usually due to configuration changes, not hardware failure. Common Causes 1. Pin Mapping Changes The new firmware…

Read MorePIR Sensor Not Detecting After Firmware Update (ESPHome/Tasmota)
  • Troubleshooting

PIR Sensor False Triggers from Solar Panels or Inverters

Introduction Solar power systems are becoming common, and they can interfere with PIR sensors in two ways: thermal radiation from hot panels and electrical noise from inverters. Two Types of Interference 1. Thermal Radiation from Panels Solar panels get hot…

Read MorePIR Sensor False Triggers from Solar Panels or Inverters
  • Troubleshooting

PIR Sensor Not Detecting in High Humidity Environments

Introduction High humidity environments like bathrooms, greenhouses, and tropical locations can cause PIR sensors to malfunction. Moisture in the air and on the lens interferes with infrared transmission. How Humidity Affects PIR Sensors 1. Water Vapor Absorption Water vapor absorbs…

Read MorePIR Sensor Not Detecting in High Humidity Environments
  • Troubleshooting

PIR Sensor False Triggers from Water Pipes (Plumbing)

Introduction Hot water pipes running behind walls or ceilings can cause PIR sensors to false-trigger. When hot water flows, the pipe warms up, creating a moving heat source that the sensor may detect. Why Water Pipes Cause False Triggers When…

Read MorePIR Sensor False Triggers from Water Pipes (Plumbing)
  • Pirsensor News

Automotive PIR Sensors: New US Regulations Mandate Child Presence Detection by 2028

February 2026 – NHTSA Finalizes Child Presence Detection Rule The National Highway Traffic Safety Administration (NHTSA) has finalized regulations requiring all new passenger vehicles weighing less than 10,000 pounds to include child presence detection systems by the 2028 model year.…

Read MoreAutomotive PIR Sensors: New US Regulations Mandate Child Presence Detection by 2028
  • Pirsensor News

Research Breakthrough: Graphene-Based Pyroelectric Sensor 100x More Sensitive

February 2026 – MIT Graphene Research Could Transform PIR Sensors A research team at MIT has demonstrated a graphene-based pyroelectric sensor with sensitivity approximately 100 times higher than conventional lithium tantalate or PZT-based sensors. The breakthrough, published in Nature Photonics,…

Read MoreResearch Breakthrough: Graphene-Based Pyroelectric Sensor 100x More Sensitive
  • Pirsensor News

Google Nest Adds Ultra-Low Power PIR to New Thermostat for Occupancy Detection

February 2026 – Nest Learning Thermostat (4th Gen) Features PIR Occupancy Google has unveiled the 4th generation Nest Learning Thermostat, featuring an integrated ultra-low power PIR sensor for accurate room occupancy detection. This marks a significant upgrade from previous models…

Read MoreGoogle Nest Adds Ultra-Low Power PIR to New Thermostat for Occupancy Detection
  • Pirsensor News

InfraTec Introduces Digital Pyroelectric Detectors with I2C Interface

February 2026 – InfraTec Digitalizes Pyroelectric Detection InfraTec, a leading manufacturer of infrared detectors, has announced a new series of digital pyroelectric detectors featuring an integrated I2C interface. The LIE-700 Digital series brings programmability and smart features to pyroelectric sensing.…

Read MoreInfraTec Introduces Digital Pyroelectric Detectors with I2C Interface
  • Pirsensor News

Murata Announces New SMD Pyroelectric Sensors for Compact Designs

February 2026 – Murata Targets Wearables with Miniature SMD PIR Sensors Murata has announced an expansion of its pyroelectric infrared sensor lineup with new surface-mount device (SMD) packages designed for compact and wearable applications. The new sensors maintain the performance…

Read MoreMurata Announces New SMD Pyroelectric Sensors for Compact Designs
Prev
1 2 3 4 5 … 10
Next

© 2026 - Pirhome.com

All content is for informational purposes only. We do not claim ownership of third-party materials.